Real World Solutions, Inc

Home of RA Classic Apex Seals and RA Super Seals

[ Home ] [ Search ] [ Recent Updates ] [ Contact Us ] [ Directions ] [ Site Map ] [ How to Order ] [ Guestbook ]

EC2 Wiring Harness

Available from Bob White sales@roblinphoto.com

800-705-8541

Making the wiring harness for the EC2 can be a time consuming task. Bob White is now producing a quality harness, custom sized to your application. His prices are extremely reasonable and the quality is first rate. We are installing Bob's harness on our RV-8 project.

You can view Bob's EC2 wiring harness catalog at http://www.rotarycables.com

Options for your custom harness include:

15 pin connector	solder or crimp
37 pin connector	solder or crimp
	straight, 90 or 45 degree exit	If 45 or 90 degrees, right or left
Length from 37 pin connector (in 6 inch increments) to:	Control panel	This cable is usually terminated at both ends, but for a canard, the 15 pin connecter can be left off to let the builder run the cable through bulkheads, etc.
	Crank angle sensor
	Disable switches
	EM2 data
	Fuel injectors
	Ignition coils
	EC2 power (+12V)
	OAT Temp Sensor