Real World Solutions, Inc

            Home of RA Classic Apex Seals and RA Super Seals

Intake Manifold / Injector Runners

Paul Lamar, editor of an on-line rotary engine newsletter, designed and is selling the following products.  These parts do not represent a finished and ready to bolt on manifold but should make fabricating one easier than starting from scratch.  To complete the manifold, four 90 degree aluminum bends are to be welded between the lower manifold and injector runners.  Other items needed include the  fabrication and mounting the injector rail for  4 injectors.   A plenum  chamber and throttle body  connected to the flanged end of the injector runners will complete the manifold.

 Please note that we have not flown or tested these items.  Please contact Paul Lamar directly for questions and orders.   These parts are not available from RWS directly.

Lower Intake Manifold

Weight: 3.5 lbs unfinished/ 2 to 3 lbs when trimmed & finished by builder

Cost: $175 plus $15 shipping per event (if you order both manifold and runners, shipping cost is still $15.00)

Injector Runners

Weight: 12 oz each,  less when trimmed and finished by builder

Price:  $50 each plus $15.00 shipping/each event (if you order multiple items, the shipping cost is still $15.)

Copyright 1997- 2011 Questions on this web site?  email laura@rotaryaviation.com